Jobs und Karriere     CLAROS
Deutsch

ORBISPHERE A1100 Elektrochemischer Sauerstoff-Sensor, Edelstahl, 40 bar

VERALTETER ARTIKEL

ORBISPHERE A1100 Elektrochemischer Sauerstoff-Sensor, Edelstahl, 40 bar
Artikel-Nr.: A1100-S00

VERALTETER ARTIKEL

Schnelle Erfassung von Prozess-Änderungen

A negligibly small residual signal and an unrivaled accuracy (±0.1 ppb) are made possible by the exclusive Orbisphere design. The very fast response time (down to t90 = 7.2 s) is achieved through a unique membrane installation, and is improved through the use of an auxiliary guard ring electrode to shield against the influence of other gases and improve stability. All these features provide a reliable and accurate sensor with fast reaction to sample changes for highly effective process monitoring.

Sensorerneuerung in drei Minuten mit vorgefüllter Ersatzpatrone

With the pre-mounted membrane cartridge including electrolyte the sensor is ready to use in 3 minutes without the risk of incorrect membrane mounting.

Einzigartiges Design garantiert lange Austauschintervalle

Unique design allows for extended period between recharges

Sensor mit ATEX-Zulassung für raue Umgebungen verfügbar

ATEX certified A1100 sensor available for harsh chemical environments.

Rugged and Resistant

Robust stainless steel design for use in the most demanding applications including resistance to CIP and pressures up to 100 bar

Inhalt

Sensor only.
Controller, sensor cable, flow-chamber or process connection must be ordered separately.

Technische Daten

Ansprechzeit: 2935A-A : 2,5 min
2952A-A : 38 s
2956A-A : 7,2 s
29552A-A : 90 s
Anströmgeschwindigkeit: Recommended flow rate in flow chamber
2935A-A: 25 mL/min
2952A-A: 50 mL/min
2956A-A: 180 mL/min
29552A-A: 50 mL/min
Genauigkeit: ±1% of reading, or ± lower measurement range, whichever is greater ±1% of reading, or ± lower range, whichever is
greater (Assuming correct calibration)
Gewährleistung: 24 Monate
Gewicht: 0,3 kg
Inhalt: Sensor only.
Controller, sensor cable, flow-chamber or process connection must be ordered separately.
Medienberührende Materialien: Stainless Steel 1.4404 (AISI 316L), surface finish: N5, Ra < 0.4 µm
Membrane (see specification table).
No O-rings are in contact with the sample.
Messbereich: Range at 25 °C
2935A-A: 10 ppb - 400 ppm or 20 Pa - 1,000 kPa
2952A-A: 1 ppb - 80 ppm or 5 Pa - 200 kPa
2956A-A: 0.1 ppb - 20 ppm or 0.25 Pa - 50 kPa
29552A-A: 2 ppb - 80 ppm or 5 Pa - 200 kPa
Probendruck: 0 - 100
Schutzklasse: IP68
Temperaturbereich: -5 - 60 °C (23 - 140 °F), without grille, during measurement
-5 - 95 °C (23 - 203 °F), with grille
Umgebungstemperatur: -5 - 100 °C (23 - 212 °F) (due to electrolyte, but sensor will not be damaged up to 200°C / 392°F) (mechanical)
Zertifizierung: 2004/108/EC - EN 61326-1