Jobs und Karriere     CLAROS
Deutsch

POLYMETRON 8810 Fluoride analyser, basic unit, 19" panel, 110V / 60Hz

POLYMETRON 8810 Fluoride analyser, basic unit, 19
Artikel-Nr.: 368810,32116
Einzelpreis Kontakt

Technische Daten

Anschluss (Druckluft): 4 / 6 mm tube connector
Anschluss (Probeneinlass): 12 mm barbed stem for 12 mm ID hose
Austauschbare Sensoren: ISE, reference electrode, PT100
Breite: 482 mm
Druckbereich: 0,5 - 6 bar
Druckluft: 4 - 7 bar filtered and dried air
  4 - 7 bar filtered and dried air
Durchflussrate: 40 - 300 L/h
Gehäuse-Schutzklasse: IP65
Genauigkeit: ± 2 ± 3 %
Gewicht: 25 kg
  25 kg approximately
Höhe (Panel): 753 mm
Kalibriermethode: Manual 2-point or 1-point calibration method (automatic calibration method to be ordered separately)
Measuring Principle 2: Automatic titration using potentiometric endpoint detection based on volumetric analysis
Messbereich: Fluoride 0.1 - 500 mg/L F
Messintervall: 5 - 999 min frei programmierbar
Methode: Measuring Fluoride Ion Selective Electrode (ISE), type 8470B
Niveauregulierung: sample, reagents, calibration solution and chemical cleaning
Optionen: External dilution, automatic calibration, automatic heating device, chemical cleaning, conditioning, reagent tray, free-standing cabinet, wall mount
Probenahmemodus: Fixed or loop
Probenahmequalität: No filtration required, only in coarse particle separation
Probenströme: 1
Probentemperatur: 5 - 50 °C (41 - 122 °F)
Probenvolumen: 200 - 1000 mL per cycle
Process connection (drain): 2x Kabel-Durchführung für 2 - 6 mm Durchmesser
Prozessanschluss (Abfluss): 3 x cable glands for diameter 13 - 18 mm
Prozessanschluss (Spülwasser): 6 mm barbed stem for 6 mm ID hose
Pumpen: peristaltic reagent pump for sample conditioning (additional peristaltic or piston pumps to be ordered separately)
Reagent capacitiy: 10 L canisters supplied with instrument
Relais: 1 collective alarm; warning or alarm system
  2 high or low limits on the concentrations
Rinse water pressure: 0,5 - 6 bar
Sensoren: Fluoride Ion Selective Electrode (ISE) type 8470B, reference electrode type 8483B, temperature sensor PT100
Spannungsversorgung (Hz): 60 Hz
Spannungsversorgung (Volt): 110 V AC
Stromausgang: 2 x 0/4 - 20 mA linear, logarithmic or
bilinear programmable
Tiefe: 122 mm
Umgebungstemperatur: 5 - 55 °C
Wartungs-Intervall: 2 to 4 weeks application specific
Wartungs-Vorgaben: 1 to 4 weeks application specific