Jobs und Karriere     CLAROS
Deutsch

POLYMETRON 9500 Controller: 24 V DC with one POLYMETRON pH/ORP sensor input, one POLYMETRON conductivity sensor input, MODBUS 232/485, and two 4-20 mA outputs

POLYMETRON 9500 Controller: 24 V DC with one POLYMETRON pH/ORP sensor input, one POLYMETRON conductivity sensor input, MODBUS 232/485, and two 4-20 mA outputs
Artikel-Nr.: 9500.99.71764
Einzelpreis Kontakt
Lieferung innerhalb 1 Woche

Save time on design

A single design source and one product platform means you spend less time searching for design files or configuring components. Create and reuse your optimal design templates.

Accelerate your installation

One source, interchangeable components, a common user interface, and one support team make installation faster and less complicated. Quickly and easily transfer user settings between controllers.

Reduce training complexity

A single platform minimises time required to teach and learn product operations, getting new systems in use faster.

Simplify maintenance and operation

Common menu guides reduce variability and provide step-by-step procedures for maintenance and calibration. Standard visual alerts across parameters notify operators when troubleshooting is required.

Optimierung des Betriebs mithilfe von Warnmeldungen, die den Bediener informieren, wenn eine Fehlerbehebung erforderlich ist.

Inhalt

Controller, mounting hardware, basic user manual

Technische Daten

Abmessungen (H x B x T): 144 mm x 144 mm x 181 mm
Analoge Ausgänge: Two (Five with optional expansion module) 0/4 to 20 mA isolated current outputs, max. 550 Ω, Accuracy: ±0.1% of FS (20 mA) at 25 °C, ±0.5% of FS over -20 °C to 60 °C range
Analoge Ausgänge: Funktionsmodus: Linear, Logarithmic, Bi-linear, PID
Betriebsbedingungen: -20 - 60 °C bei 0 bis 95 % relative Luftfeuchtigkeit (nicht kondensierend)
Display: 48 x 68 mm
  Graphic dot matrix LCD with LED backlighting, transreflective
Display-Auflösung: 240 x 160 Pixel
Gehäusematerial: Polycarbonate
Aluminium (powder coated)
Stainless Steel
Gehäuse-Schutzklasse: IP66 / NEMA 4X
Gewährleistung: 2 Jahre
  24 Monate
Gewicht: 1,70 kg
Inhalt: Controller, mounting hardware, basic user manual
Kabelverschraubung: 1/2" NPT Conduit
Kommunikation: digital: MODBUS RS232/RS485, PROFIBUS DPV1, HART optional
Kommunikationsmöglichkeiten: Modbus RS232/RS485
Lagerbedingungen: -20 °C - 70 °C
Montagearten: Wall
Pole
Panel Mounting
Relais: Vier elektromechanische SPDT-Kontakte (Form C), 1.200 W, 5 A
Relais Funktionen: Scheduler (Timer), Alarm, Feeder Control, Event Control, Pulse Width Modulation, Frequency Control, and Warning
Relay: Signalquelle: Primary or secondary measurement, calculated value (dual channel only) or timer/scheduler
Sensor-Eingang: Leitfähigkeit
  pH/Redox
Sicherheitsstufen: 2
Spannungsversorgung (Hz): 50/60 Hz
Spannungsversorgung (Volt): 24 V DC
Sprachen Bedienungsanleitung: Bulgarian, Chinese (PRC), Croatian, Czech, Danish, Dutch, English, Estonian, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Lithuanian, Polish, Portuguese (Brazil), Portuguese (Portugal), Romanian, Russian, Slovak, Slovenian, Spanish, Swedish, Thai, Turkish
Stromversorgungsoptionen: 24 V DC, ohne Stromanschlusskabel
Zertifikate & Zulassungen: EMV
CE-konform in Bezug auf leitungsgebundene und abgestrahlte Störungen:
- CISPR 11 (Grenzwerte der Klasse A)
- EMV-Störfestigkeit EN 61326-1 (Industriegrenzwerte)